TYDIX Architectural Door and Cabinet Hardware

Door Pulls

Post Office Box 826, Morro Bay, CA 93443
Phone: 805-788-0588 Fax: 805-788-0587
Email: tydixprod@sbcglobal.net

Printable version of our catalog - Click here
Catalog File Size: 1.84 MB

TYDIX Door Pulls SECURITY SYSTEMS
HALF SIZE

DOOR PULLS ARE INTERNALLY SCREWED TOGETHER - No Set Screws ONE-SIDE-ONLY INSTALLATION

		The drawings on this page are intended to show standard systems used with the 78000 series of door pulls. (See C-4 through C-7.) Each system type is available with most TYDIX Door Pulls.
TYPE MLB (METAL BLIND)

BACK-TO-BACK INSTALLATION

For Tempered Glass Doors For Hollow-Metal or Wood doors

1-1/4" Base shown (No. 2); requires a 7/8" hole
in glass.  May substitute 7/8" base (No. 3);
requires 5/8" hole.  Machine thread only
(no set screws). 1-1/4" Base shown (no. 2)>  May substitute 1" or 7/8"
base.

For Tempered Glass Doors	For Hollow-Metal or Wood doors
1-1/4" Base shown (No. 2); requires a 7/8" hole in glass. May substitute 7/8" base (No. 3); requires 5/8" hole. Machine thread only (no set screws).	1-1/4" Base shown (no. 2)> May substitute 1" or 7/8" base.